Fault Messages; Display In The Instrument Panel - Seat Alhambra Owner's Manual

Display in the instrument panel

Fault messages

Faults are shown by warning lamps and / or as symbols with
warning and information reports on the display.
The system runs a check on certain components and functions when the igni-
tion is switched on and while the vehicle is moving. Functional problems are
shown by warning lamps and / or red or yellow symbols with fault texts on the
Overview of selected fault messages
Fault messages are displayed on the combi-instrument display.
The following overview does not show all fault messages. Not all fault
messages are displayed with a symbol.
Fault message
STOP BRAKE FAULT SERVICE MANUAL
HANDBRAKE ON
STOP BRAKE FAULT SERVICE MANUAL
STOP CHECK COOLANT SERVICE MANUAL
Safety First
Symbol



Operating instructions
combi-instrument. Depending on the exact nature of the functional problem,
audible warnings may also be given.
Note
•
The size of the display depends on the type of combi-instrument you have
fitted. In some models, the combi-instrument does not have an integrated
display.
•
In addition to warning messages given on a fault, you will receive informa-
tion in the display on procedures or will be asked to carry out certain tasks.
Warning symbols (priority 1)
If the symbol lights up again after a fault has been corrected, you should stop
the vehicle immediately, switch off the engine and seek professional advice.
Stop the car, turn the engine off and check the brake fluid level
⇒ page 221.
Release the handbrake.

Stop the car, turn the engine off and seek professional help ⇒ page 179
and

Checking coolant level ⇒ page 216
Tips and Maintenance
Cockpit
Action
Technical Data
69