Seat Alhambra Owner's Manual page 239

Removing the hubcaps
The hubcaps must be removed to gain access to the wheel
bolts.
– Take the wire hook from the vehicle tool kit.
– Insert the hook into a hole in the cover
– Pull off the cover.
Safety First
Fig. 155 Removing the
hubcaps
⇒ fig.
155.
Operating instructions
Removing the caps from the wheel bolts
The caps must be removed from the wheel bolts before the
wheel bolts are unscrewed.
– Take the wire hook from the vehicle tool kit.
– Insert the hook through the opening in the middle of the cap
⇒ fig.
156.
– Use the wire hook to remove the caps.
The caps protect the wheel bolts and should be replaced after changing the
tyre.
When fitting, make sure that the caps click securely into place. They could
otherwise fall off.
Tips and Maintenance
If and when
Fig. 156 Use the hook to
pull off the cap
Technical Data
237