Windscreen washers
Windscreen wiper
The windscreen wiper lever controls the windscreen wipers
and the automatic wash and wipe.
The windscreen wiper lever
Intermittent wipe
– Move the lever up to position
A
– Move the control
A
intervals. Control to the left: long intervals; control to the right:
short intervals. Four wiper interval stages can be set using switch
A
.
A
Safety First
Fig. 79 Windscreen wiper
and windscreen wash
lever
⇒ fig. 79
has the following positions:
A
.
1
to the left or right to set the length of the
Operating instructions
Slow wipe
– Move the lever up to position
Continuous wipe
– Move the lever up to position
Brief wipe
– Move the lever down to position
wipe.
Windscreen wiper and washer system
A
– Pull the lever to position
5
windscreen while the lever is held in this position.
– Release the lever. The wipers will keep running for approximately
4 seconds.
Switching off the wipers
– Move the lever to position
WARNING
Worn and dirty wiper blades obstruct visibility and reduce safety levels.
•
In cold conditions, you should not use the wash / wipe system unless
you have warmed the windscreen with the heating and ventilation system.
The washer fluid could otherwise freeze on the windscreen and obscure
your view of the road.
•
Observe the warnings "Changing wiper blades".
Tips and Maintenance
Lights and visibility
A
.
2
A
.
3
A
to give the windscreen a brief
4
. A jet of water will be sprayed on the
A
.
0
Technical Data
117