Seat Alhambra Owner's Manual page 179

Lever for cruise control
The CCS can be operated using the controls on the turn signal
lever or on the multi-function steering wheel.
Safety First
Fig. 132 Turn signal and
main beam headlight
A
lever control and
A
A
rocker switch for
B
cruise control
Fig. 133 Multifunction
steering wheel: CCS
controls
Operating instructions
Switching on the system
⇒ fig. 132
– Move the control
lights up in the combi-instrument when the cruise control system
is switched on.
Switching off system
⇒ fig. 132
– Move the control
⇒ fig. 133

key once.
Setting speed
– Press the lower part SET of the rocker switch
briefly when you have reached the speed you wish to set
⇒ fig. 133
 -
. This speed is then stored and maintained.
Increasing the stored speed
– To reach the desired speed hold down the upper part of the
⇒ fig. 132
rocker button  +
Reducing the set speed
– To reach the desired speed hold down the lower part of the rocker
⇒ fig. 132 A
 -
button
B
speed falls as the vehicle is no longer accelerating, not due to
sharp braking.
If you increase speed by using the accelerator, the previously programmed
speed will be resumed when the accelerator pedal is released. This will not be
the case, however, if the vehicle speed is more than 10 km/h higher than the
stored speed for longer than 5 minutes. The speed will have to be stored
again.
Tips and Maintenance
Driving
A

to the left to ON. The symbol
B
A
to the right to OFF or press the
A
⇒ fig. 132 A
once
B
A ⇒ fig. 133
or button  +
B
⇒ fig. 133
 -
or button . The
Technical Data
177
.