Seat Alhambra Owner's Manual page 235

WARNING
•
If you are driving without the spare wheel, the cable should be rolled up
and the bracket fastened to the floor of the luggage compartment.
Fitting the defective wheel in the spare wheel casing
1. Place the wheel behind the vehicle.
2. Insert the support on the inside of the defective wheel, through
a central opening.
3. Insert the defective wheel below the vehicle, with the outer side
facing downwards.
Safety First
Fig. 152 Resting point for
the spare wheel on the
bumper
Operating instructions
⇒ page 232, fig. 151
4. Remove the box spanner
bolt on the floor of the luggage compartment several times to the
right, until the defective wheel is firmly secured against the
inside of the luggage compartment floor ⇒
the spare wheel" on page 232.
5. Close the opening with the rubber seal
A
and lower the cover .
A
WARNING
Tighten the bolt of the luggage compartment to a maximum torque of 25
Nm.
Tips and Maintenance
If and when
A
and turn the
C
in "Taking out
⇒ page 232, fig. 151 A
B
Technical Data
233