Honeywell LYNX Touch User Manual page 47

Rules
Up to 40 rules can be programmed. Rules 1 through 20 are used for Triggers, Z-Wave Scenes and Follow-Me
Messages. Rules 21 through 40 are used for Z-Wave Scenes and for E-mail notification and are only accessible
through TotalConnect Service. Check with your Installer to see which options are available to you.
The following options are programmed in this section:
Programming Field
Rule 1 - 20:
Name:
Type:
Action:
Start Zone Type:
Stop Zone Type:
Start System Operation:
Stop System Operation:
Zone Number Operation:
Programming Rules
Ready To Arm
1 : 2 35
PM
October 1, 2013
Security
Mostly Sunny
68
F
Feels Like 71 F
5-Day Forecast
News
Ready To Arm
Scenes
Schedules
Rules
Ready To Arm
Rules 1 Rules 2
New New
Rules 3 Rules 4
New New
Rules 5 Rules 6
New New
Edit
Select Rule 1 -20
Name the device
Select the output type
Select the action required for the device
Select Zone Type to start event
Select Zone Type to stop event
Select System Operation to start event
Select System Operation to stop event
Select Zone Number to trigger event upon fault, trouble or alarm as selected.
Automation Video
Notices
Traffic
5200-100-001-V0
Tools
Garage door setup
5200-100-053-V0
Delete
5200-100-059-V0
Action
Note: Rules 21-40 are only accessible through TotalConnect Service.
1. With the system in the disarmed state, select the "Automation"
icon from the Home Screen. The system displays the first
page of the Automation screen. Select the " " icon to
advance to the second page of the Automation screen.
2. Select the "Rules" button. The system displays the Rules
screen.
3. Select a "Rules" key followed by the Edit button.
Note: Rules 21-40 are only accessible through TotalConnect
Service.
– 47 –
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
Automation