Automation - Honeywell LYNX Touch User Manual

USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS

Automation

General Information
Automation is used to program triggers, send Follow-Me or E-mail messages of system events or program home
automation features (Z-Wave) including Rules and Scenes (if Z-Wave communications have been enabled). Up
to 40 rules can be programmed. Rules 1 through 20 are used for Triggers, Z-Wave Scenes and Follow-Me
Messages. Rules 21 through 40 are used for Z-Wave Scenes and for E-mail notification and are only accessible
through TotalConnect Service. Check with your Installer to see which options are available to you.
Note: Switches, Thermostats, Locks, Water Valves, Tools, and Scenes options will only appear when Z-wave has been enabled.
Refer to the Home Automation Guide P/N 800-16091 for information regarding these features.
Schedules
The Schedules Feature can be used to program the system to automatically perform certain functions (i.e.;
automatically arming the system in Stay mode and activating output [Z-Wave] devices) at a scheduled time,
day of the week or month, as applicable.
Programming a Scheduled Function
Ready To Arm
1 : 2 35
PM
October 1, 2013
Security
Mostly Sunny
68
F
Feels Like 71 F
5-Day Forecast
News
Ready To Arm
Scenes
Schedules
Rules
Ready To Arm
No items to display!
Edit Add New
Automation Video
Traffic Notices
5200-100-001-V0
Tools
Garage door setup
5200-100-053-V0
Delete
5200-100-117-V0
1. With the system
"Automation" icon from the Home Screen. The system
displays the first page of the Automation screen. Select the
" " icon to advance to the second page of the Automation
screen.
2. Select the "Schedules" icon. The system displays the
Scheduling screen.
Note: Rules 21-40 are only accessible through TotalConnect Service.
3. Select "Add New". The system displays the scheduling
options screen.
– 44 –
in the disarmed state, select the