Honeywell LYNX Touch User Manual page 19

Ready To Arm
Arm the system in Stay mode
Enter Code:
Arm Night
Cancel Quick Arm
Armed Stay - Exit Now
Exit now
28 seconds
Disarm Restart
10:18 AM June 8, 2010
Armed Stay
Disarm
10:18 AM June 8, 2010
If an invalid User Code is entered or if a valid user code has not been entered within 10 seconds, the system
will return to the "home" screen and it will not be armed.
1 2 3
4 5 6
7 8 9
Clear 0
5200-100-082-V0
System
Zones
Message
More
7000-100-021-V0
System
Zones
Message
More
7000-100-022-V0
2. Select the "Arm Night", then enter a valid User Code.
OR
If Quick Arm has been enabled, select the "Quick Arm" icon.
Note: If a valid user code is not entered or the Confirm icon has
not been selected within 10 seconds, the system returns to
the "home" screen and it will not be armed.
3. The system beeps three times and announces "Armed Stay
Exit Now". The exit delay screen is displayed. If programmed
the display counts down the time remaining in the exit delay.
4. At the end of the exit delay the system announces "Armed
Stay" and displays the "Armed Stay" screen.
– 19 –
SECURING THE PREMISES SECURING THE PREMISES
SECURING THE PREMISES SECURING THE PREMISES
Arming the System