Disarming The System - Honeywell LYNX Touch User Manual

SECURING THE PREMISES SECURING TH E PREMISES
SECURING TH SECURING TH E PREMISES E PREMISES

Disarming the System

Select the "Disarm" icon or the "Off" key to disarm the system and to silence alarm and trouble sounds. See the
Summary of Audible & Visual Notifications section for information, which will help you to distinguish between
fire and burglary alarm sounds. During Entry Delay or when an Alarm Condition exists, the system will be
disarmed as soon as the correct user code is entered on the touch screen. Selecting the Off key is not required.
The entry beeps or alarm sound can be silenced by pressing any key however, it will restart in 10 seconds if the
correct User Code is not entered. The Ready indicator will light (if no alarms have occurred while armed) and
the control will beep once to confirm that the system is disarmed.
If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred during your absence
and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a
nearby safe location.
Disarming the System
Armed Stay
Disarm
10:18 AM June 8, 2010
Armed Stay
Enter Code:
Cancel
If an invalid User Code is entered, system will return to the Security Screen.
Disarming the System During Entry Delay
Armed Stay - Disarm Now
Disarm Now
ARMED READY
Enter Code:
Cancel
**IMPORTANT**
System
Zones
Message
More
7000-100-022-V0
1 2 3
4 5 6
7 8 9
Clear 0
5200-100-022-V0
1 2 3
4 5 6
7 8 9
Clear 0
5200-100-023-V0
1. Select the "Disarm" icon. The system beeps once and
displays a keypad.
2. Enter a valid Code. The system beeps once and announces
"Disarmed Ready to Arm".
Note: If a valid user code is not entered or the Confirm icon has
not been selected within 30 seconds, the system returns
to the "home" screen and it will not be disarmed.
Upon entering the premise when the system is armed, the control
announces "disarm system now".
1. Enter a valid Code. The system beeps once and announces
"Disarmed Ready to Arm".
Note: If a valid user code is not entered before the programmed
entry delay occurs, the system enters alarm mode.
– 26 –