Triple Watch Scan; Normal Scan; Triple Watch Alert Scan; Alert Scan - Uniden Oceanus DSC Series Owner's Manual

UT01910ZZ_0 9/18/03
To cancel the channel in Memory, press and hold UIC/MEM for 2
seconds. The
Note: The Memory channel can be set independently in 3 regional
modes (USA, INT, and CAN). You cannot use this feature in
WX mode or for channel 70.

Triple Watch Scan

To turn Triple Watch Scan On, press and hold 16/9/TRI for 2 seconds.
While the current channel is scanned, Channel 16 and Channel 9 are
also scanned every 2 seconds. Then

Normal Scan

Normal Scan is performed only when the memory CH is registered.
To turn Normal Scan On, press and hold 16/9/TRI for 2 seconds in Triple
watch Scan mode. Although Memory CH is scanned, Channel 16 and
Channel 9 are not.

Triple Watch Alert Scan

To turn Triple Watch Alert Scan On, press and hold WX/ALERT for
2 seconds while in Triple Watch Scan mode. While Memory CH is
scanned, Channel 16 and Channel 9 are scanned every 2 seconds, and
WX CH is scanned every 7 seconds.
LCD.

Alert Scan

To turn Alert Scan On, press and hold WX/ALERT for 2 seconds. While
Memory CH is scanned, WX CH is scanned every 7 seconds.
appears on the LCD.
5:37 PM Page 15
MEM
icon disappears.
15
TRI
appears.
TRI
and icon appear on the
icon