Scan Mode With Weather Alert Watch; Scan Mode With Triple Watch Or Dual Watch - Uniden MHS126 Owner's Manual

English owner's manual
Hide thumbs Also See for MHS126:
Table of Contents

Advertisement

Š You must have at least two channels in memory to start
a scan. However, you cannot save marine channel 70
or Weather channels.
Š You cannot transmit while in Scan mode.
Š To save a channel into memory, select the channel,
then press
you tune to that channel.
Š To remove a channel from memory, set the radio to
that channel, then press
longer displays.
Š When the radio stays on a channel, press
leave that channel and resume scanning.
Š To end the scan, press the
radio remains on the last scanned channel.

Scan mode with Weather Alert Watch

If you activate Weather Alert Watch while in Scan mode,
the radio checks the most recently/used weather channel
every seven seconds, then continues scanning the next
channel in memory:
08
10
11

Scan mode with Triple Watch or Dual Watch

If you activate Triple Watch while operating in Scan mode,
the radio checks channels 16 and 9 every two seconds,
Uniden MHS126 Radio Owner's Manual
MEM/SOS
. The MEM icon displays whenever
Memory Channel Scan
12
13
14
Every 7 seconds, the radio
checks the last-used
weather channel, then
scans the next channel.
MEM/SOS
. The MEM icon no
SCAN/DUAL
15
17
20
24
WX Alert
Watch on
Channel Up
button again; the
25
wx
to
E-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents