Uniden Oceanus DSC Series Owner's Manual page 41

UT01910ZZ_0 9/18/03
2-C-1. NEW
If you want to register a new FIPS code
1. Press SELECT at
screen appears.
2. You can now enter the new FIPS code.
Press CH ▲ to increase the number,
CH ▲ to decrease. The number will be
entered when SELECT is pressed, and
the blinking digit moves to the right.
When you finish entering the last digit,
the radio returns to
2-C-2. EDIT
If you want to edit the FIPS code
1. Press SELECT at the code that you
want to edit.
EDIT
2.
3. You can now edit the FIPS code. Press
CH ▲ increase the number, CH ▼ to
decrease. The number will be entered
when SELECT is pressed, and the
blinking digit moves to the right.
5:37 PM Page 38
NEW
. The registering
NEW
screen.
appears, then press SELECT.
38