Table of Contents
Advertisement
UT910ZH (OCEANUS) OM 0811
To cancel the channel in Memory, press and hold UIC/MEM for 2
seconds. The
Note:
The Memory channel can be set independently in 3 regional
modes (USA, INT, and CAN). You cannot use this feature in
WX mode or for channel 70.
Triple Watch Scan
To turn Triple Watch Scan On, press and hold 16/9/TRI for 2 seconds.
Although the current channel is scanned, PRI 16 CH and PRI 9 CH are
scanned every 2 seconds. Then "
Normal Scan
Normal Scan is performed only when the memory CH is registered.
To turn Normal Scan On, press and hold STEP/SCAN for 2 seconds in
Triple watch Scan mode. Although Memory CH is scanned, EMG 16 CH
and EMG 9 CH are not.
Triple Watch Alert Scan
To turn Triple Watch Alert Scan On, press and hold WX/ALERT for
2 seconds while in Triple Watch Scan mode. While Memory CH is
scanned, EMG 16 CH and EMG 9 CH are scanned every 2 seconds,
and WX CH is scanned every 7 seconds. "
the LCD.
Alert Scan
To turn Alert Scan On, press and hold WX/ALERT for 2 seconds. While
Memory CH is scanned, WX CH is scanned every 7 seconds.
8/11/03
10:45 AM
MEM
icon disappears.
TRI
15
Page 15
" appears.
TRI
" and "
ALT
" appear on
Advertisement
Table of Contents
