Scan Mode With Weather Alert Watch; Scan Mode With Triple And Dual Watch - Uniden UM425 Owner's Manual

Getting Started
• To remove a channel from memory, set the radio to that channel, then
press and hold the
longer show on the display.
• To activate scan mode, press the
MEM
• When the radio automatically stops on a channel, press the
UP
• To end the scan, press the microphone
SCAN-MEM

Scan mode with Weather Alert Watch

If you activate Weather Alert
Watch while operating in scan
mode, the radio checks the most
recently-used weather channel
every seven seconds, then
continues scanning the next
channel in memory:
Press and hold the
seconds to turn Weather Alert Watch on or
off.

Scan mode with Triple and Dual Watch

If you activate Triple Watch while
operating in scan mode, the radio
checks channels 16 and 9 every
two seconds, then goes on to
scan the next channel; with Dual
Watch turned on, the radio only
checks channel 16:
SCAN-MEM
button again to return to the previous mode.
button to leave that channel and resume scanning.
button. The radio remains on the last scanned channel.
WX-ALERT
08 10
Every 2 seconds,
the radio checks
channels 9 & 16
then goes on to
the next channel.
with Triple Watch on
Reversed 16 & 9
UJ-SW 20061215 #17
button for two seconds. Memory will no
SCAN-MEM
button for two
Press and hold the
the radio or the microphone) for two
seconds to turn Triple/Dual Watch on or
off. (To change between Triple or Dual
Watch, see page 21.)
Memory Channel Scan
11 12 13 14
09 16
E-15
button. Press the
PUSH TO TALK
button or the
16/9-TRI
15 17 20 24
SCAN-
CHANNEL
button (on
25