Buzzer And Cable Assembly - P/N 4C765; Garmin To 5-Pin Serial Cable - P/N 133688; Figure 49: Buzzer And Cable Assembly; Figure 50: Garmin To 5-Pin Serial Cable - Cal Amp LMU-26xx Install Manual

CalAmp | LMU-26xx Install Guide
7.1 BUZZER AND CABLE ASSEMBLY – P/N 4C765
This cable is used to connect an in-cab buzzer to the LMU-26xx. The ground wire must be connected to
the desired output line on the LMU-26xx. The power wire of the buzzer must be installed to the main
power line for the LMU-26xx. When the LMU-26xx sets the output to ground the buzzer will sound.
7.2 GARMIN TO 5-PIN SERIAL CABLE – P/N 133688
This cable is used to connect a certified Garmin PND to the LMU-26xx.The Garmin 5-pin connector plugs
into the serial AUX2 cable on the LMU-26xx. The Garmin connector must be plugged into the back of the
certified Garmin PND.
Page 44

Figure 49: Buzzer and Cable Assembly

Figure 50: Garmin to 5-Pin Serial Cable

MBUD-0199v3.3