Table of Contents
Advertisement
CalAmp | LMU-26xx Install Guide
5.1.1 UNDER DASH INSTALLATION
If the LMU-260 is mounted under the dashboard of the vehicle (Figure 6), ensure the device is mounted
with the "label side" facing up. Do not install the device where it will be obstructed by metal
components. Common install locations are in the void above the glove box (if no airbag present) or
above the vents.
You may need to remove part of the dash facing for access. Typically, the dash facing is attached with
just clips. Do not use excessive force wedging the device into a location under the dash. Use the
provided 're-closable fastener tape' to attach the device to the underside of the dash as described in the
steps below.
Figure 7: LMU-26xx Under Dash Mount
Page 12
MBUD-0199v3.3
Hide quick links:
Advertisement
Table of Contents
