Install Optional Serial Cables; Figure 24: Lmu-26Xx Standard Wiring Harness And Connectors - Cal Amp LMU-26xx Install Manual

CalAmp | LMU-26xx Install Guide

5.6 INSTALL OPTIONAL SERIAL CABLES

The LMU-26xx Power Accessory Cables have two serial ports: AUX1 and AUX2. Each wiring harness
comes with both ports pinned out to individual 5-pin Molex pigtail connectors.
.
IMPORTANT: The wire colors used on the vPOD and jPOD are confusing in this application. The colors
match those of the AUX1 port on the harness, however the devices actually go to AUX2 port.
Page 24

Figure 24: LMU-26xx Standard Wiring Harness and Connectors

Serial AUX1 for
NMEA
Serial AUX2 for
Garmin (PND),
jPOD or vPOD
MBUD-0199v3.3