Figure 11: Power Leads - Cal Amp LMU-26xx Install Manual

CalAmp | LMU-26xx Install Guide
If hard wiring the device, the LMU-26xx power cable has 3 wires: 12 Volts continuous, 12 Volts ignition
switched, and ground.

All power connections must be insulated with electrical tape.

Use care to prevent accidentally shorting any connections. Power Connections should meet
aftermarket electronics industry installation practices.

Power connections, both Constant and Ignition, must be fused using the supplied in line 3A
fuses and holders.

All power connections must be made using manufacturer approved methods for adding
accessories to vehicles.
Page 16

Figure 11: Power Leads

Ignition (White)
+12V (Red)
Ground (Black)
MBUD-0199v3.3