Applications - GBC Orca 1600 Operation And Maintenance Manual

Safety
D o not use an open blade to cut
the w eb near the rollers.
Y ou can put cuts into the rollers!
IN F O R M AT IO N
T he nip can only be changed w ith the
upper roller in the up position.
IN F O R M AT IO N
T his w ill prevent the pull rollers from
contacting if the air should be rem oved.
Page 1 - 10
C AU T IO N
Orca 1600 Operation and Maintenance Manual

1.9 Applications

The following symbols are positioned at
various points in Section 6 Applications.
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
For optim al tem perature settings of
various lam inates, contact your
supplier or sales representative.
G eneral rule: Sm aller prints require m ore
speed or less tem perature. L arger prints
require less speed or m ore tem perature.
U se film brake tension to control the
separation point of the release liner.
© GBC Films Group February 2001
WARNING
IN F O R M AT IO N
IN F O R M AT IO N
IN F O R M AT IO N