Operation - GBC Orca 1600 Operation And Maintenance Manual

Safety
D o not operate the m achine w ith the
control side or drive side cabinet
in the open position.
D o not operate the lam inator if the pow er
cord is dam aged or frayed. Y ou can be
severely shocked, electrocuted or cause a
fire. C ontact a qualified electrician to
replace the cord.
IN F O R M AT IO N
T he upper m ain roller and the upper pull
roller should be in the raised position.
T hese calibrations require the lam inator
to be pow ered up w hile the cabinets
are opened.
Page 1 - 8
W AR N IN G
E L E C T R IC AL
S H O C K
E L E C T R IC AL
S H O C K
Orca 1600 Operation and Maintenance Manual

1.8 Operation

The following symbols are positioned at
various points in Section 5 Operation.
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
W hen the lam inator rollers are in
m otion, keep hands and fingers
aw ay from the nip of the rollers.
Y ou m ay be C R U SH E D or B U R N E D !
T he lam inator w ill only turn on if
all E -ST O Ps are unlatched.
T he center position is to prevent jam m ing
of the m otor w hen changing directions
© GBC Films Group February 2001
WARNING
W AR N IN G
IN F O R M AT IO N
IN F O R M AT IO N