Mircom ADC Series Installation, Programming, And Troubleshooting Manual page 34

MULTIPLE/SINGLE ENTRANCE SELECT
To select Multiple or Single entrance, scroll through until you reach the feature as shown below.
Press # to access the feature. The display should appear...
Enter 00 for multiple entrances or 11 for single entrance, the default is 00 for multiple. The next display should
appear...
Press # to store or * to abort entry. Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at
PROGRAM MODE menu to return to NORMAL MODE.
11 DIGIT TELEPHONE NUMBER ENTRY
To program an 11-digit telephone number, scroll through until you reach the feature as shown below.
Press # to access the feature. The display should appear...
Enter the four digit DIAL CODE followed by the 11-digit telephone number. Please note that a 10-digit telephone
number can be programmed if desired. This is useful for calling a local number with a different area code.
Example: Dial Code
Area Code
Telephone Number
Program the system as shown...
MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems
[1=Bck]
Do you want to edit
Multi/Single option?
[*=Abort]
-Program Options-
Multi or Single
M=00 S=11 _ _
Please enter choice:
-Program Options-
#=Store, *=Abort
M=00 S=11
Please enter choice:
[1=Bck]
Do you want to enter
the 11-Digit number?
[*=Abort]
-Program Options-
Code: _ _ _ _
_ - _ _ _ - _ _ _ - _ _ _ _
Please enter choice:
2863
905 (local or not a long distance number)
6604655
-Program Options-
Code: 2 8 6 3
9 - 0 5 6 - 6 0 4 - 6 5 5 .
Please enter choice:
[3=Fwd]
[#=Yes]
<== Factory default is 00.
x x
[3=Fwd]
[#=Yes]
Page 32