Mircom ADC Series Installation, Programming, And Troubleshooting Manual page 33

SET DOOR TIMER
To change Door-Open Timer (factory default is 10 seconds), scroll through until you reach the feature as shown
below.
Press # to access the feature. The display should appear...
Enter the desired door-open period. The next display should appear...
Press # to store or * to abort entry. Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at the
PROGRAM MODE menu to return to NORMAL MODE.
SET ON-LINE TIMER
To change the On-Line period (factory default is 60 sec.), scroll through until you reach the feature as shown below.
Press # to access the feature. The display should appear...
-Program Options-
On-line Timer
00 To 99 Sec.
Please enter choice:
Enter the On-Line period. The next display should appear...
Press # to store or * to abort entry. Press * to exit to the PROGRAM MODE menu. To quit, enter *000 while at the
PROGRAM MODE menu to return to NORMAL MODE.
MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems
[1=Bck]
Do you want to edit
The Door-Open-Timer?
[*=Abort]
-Program Options-
Door-Open Timer
00 to 99 Sec.
Please enter choice:
-Program Options-
#=Store, *=Abort
00 to 99 Sec.
Please enter choice:
[1=Bck]
Do you want to edit
On-Line Timer?
[*=Abort]
_ _ <==
Note: Set to 00 for 4 min. & 10 sec.
-Program Options-
#=Store, *=Abort
00 To 99 Sec.
Please enter choice:
[3=Fwd]
[#=Yes]
_ _
x x
[3=Fwd]
[#=Yes]
99 seconds max.
x x
Page 31