Operation; Switching On And Off; Zeroing / Zero Point Correction; Simple Weighing - KERN ITB Operating Instruction

Operation

2 Operation
2.1
Switching on
Switching off
2.2
Manual
Automatic
2.3
11

Switching on and off

➜ Press
.
The scale conducts a display test. When the weight display appears, the scale is
ready to weigh.
➜ Press
.
Before the display goes out, -OFF- appears briefly.

Zeroing / Zero point correction

Zeroing corrects the influence of slight changes on the load plate.
1. Unload scale.
2. Press .
The zero display appears.
In the case of scales that cannot be certified, the automatic zero point correction can
be deactivated in the menu or the amount can be changed.
As standard, the zero point of the scale is automatically corrected when the scale is
unloaded.

Simple weighing

1. Place weighing sample on scale.
2. Wait until the stability monitor
3. Read weighing result.
goes out.
User manual ME-Nr. 22017071 01/07
ITB-BA-e-0720