Interface description
4.1.2
31
Requirements for communication between scale and PC
•
The scale must be connected to the RS232 or Ethernet interface of a PC with a suit-
able cable.
•
The interface of the scale must be set to "Dialog" mode, see Section 3.6.1.
•
A terminal progam must be available on the PC, e.g. HyperTerminal.
•
The communication parameters baud rate and parity must be set in the terminal
program and on the scale to the same values, see Section 3.6.3.
ITB-BA-e-0720
User manual ME-Nr. 22017071 01/07