13 ] Updating The Systems - Denso BHT-300B User Manual

[ 13 ] Updating the Systems

[13.1] Updating the BHT system
Before proceeding to the updating procedure, you need to download a BHT system reconfig file,
referring to Section 2.6.1.
On the SYSTEM MENU, pressing the period (.) key with the SF key
held down calls up the screen shown at left.
[1] SYSTEM MODIFY:
[2] CU-F/W MODIFY:
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key.
To return to the SYSTEM MENU, press the C key.
On the MODIFY MENU, selecting "1: SYSTEM MODIFY" calls up the
screen shown at left.
[1] DO IT: Starts updating the current BHT system.
[2] FILENAME: The filename to be used for updating the BHT
system will be displayed.
If it is different from the name of the BHT system
reconfig file you have downloaded, you may specify
the correct filename here. (For details, refer to the
next page.)
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key.
Selecting "1: DO IT" calls up the screen shown at left. With this screen
displayed, the BHT immediately starts updating the current BHT
system.
Upon completion of updating, the BHT will automatically turn itself off.
110
Switches to the BHT system updating
menu.
Switches to the CU-311 system updating
menu (in LAN-support software only).