Denso BHT-300B User Manual page 101

Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT
Item
DATA SIZE
INTERVAL
TIMEOUT
COUNT
* Specification of zero (0) will set the number of echo requests to "infinite," keeping sending echo
requests (until PING is aborted).
If you specify a value out of the allowable entry range listed above, the nearest value within the range will
automatically apply.
If you select one of "1: DESTINATION IP" through "5: COUNT" items
and press the ENT key, then the entry box of that item becomes ready
to accept entry and a cursor appears. Enter the desired value by
using the numerical keys and period (.) key, and then press the ENT
key.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
If "6: SEND TYPE" is selected, use the F7 and F8 keys to choose the
desired type.
To return to the TEST PING menu, press the C key when any item is
highlighted.
Allowable entry range
4 to 1472
0 to 65535
0 to 65535
0* to 65535
87
Chapter 2 Getting Started the BHT and System Mode
Initial value
56
10
10
4