Loading The Battery ･･････････････････････････････････････････････13 - Denso BHT-904BB User Manual

2.2 Loading the Battery
Batteries are not included in the package. Have the battery specified by DENSO WAVE ready.
Specified battery: AA alkaline battery (LR6) or AA rechargeable battery eneloop
Note 1: Use rechargeable batteries already charged.
®
Note 2: eneloop is a registered trademark of SANYO Electric Co., Ltd.
Note 3: If rechargeable batteries other than eneloop
1.
Slide the battery cover lock (1) in the direction
indicated by the arrow and remove the battery
cover (2).
2.
Make sure to use the battery selector switch to
select the desired battery type.
To ensure correct operation of the
− Point −
battery power level indicator and the
charging function, make sure to select
the desired battery type with the
battery selector switch.
3.
Make sure that the new batteries are in the
correct orientation when inserting them. Insert
the new batteries in the direction indicated by
the arrow.
Do not use batteries other than those
− Point −
specified by DENSO WAVE.
4.
Insert the battery cover tab (1), and then close
the battery cover (2). The battery cover is now
locked in position.
Barcode Handy Terminal
®
®
are used, the BHT unit may not operate properly.
Using alkaline batteries
Alkaline
Using rechargeable batteries
Alkaline
(HR-3UTGA)
LR6/Ni-MH,AA
Ni-MH
LR6/Ni-MH,AA
LR6/Ni-MH,AA
Ni-MH
LR6/Ni-MH,AA
13