Table of Contents
Advertisement
[4.6]
Defining the functions of the shift key and magic keys
Defining the function of the shift key
On the SET SYSTEM menu, selecting the "6: KEY" calls up the
screen shown at left.
Highlighted is the current setting.
[1] SHIFT KEY: Switches to the SF key definition screen.
[2] M1 KEY:
Switches to the M1 key definition screen.
[3] M2 KEY:
Switches to the M2 key definition screen.
[4] M3 KEY:
Switches to the M3 (left-hand trigger switch) key
definition screen.
[5] M4 KEY:
Switches to the M4 (right-hand trigger switch) key
definition screen.
Select a desired screen by using the numerical keys or F5 and F6
keys, and then press the ENT key.
To return to the SET SYSTEM menu, press the C key.
On the SET KEY menu, select "1: SHIFT KEY" to call up the screen
shown at left.
Highlighted is the current setting.
[1] Nonlock:
Shifts the keypad only when the SF key is held
down.
[2] Onetime:
Shifts only one key pressed immediately after the SF
key is pressed. (The following keys will not be
shifted.)
Select a desired setting by using the numerical keys or F5 and F6
keys, and then press the ENT key. The screen returns to the SET
KEY menu.
67
Chapter 2 Getting Started the BHT and System Mode
Advertisement
Chapters
Table of Contents
