Denso BHT-300B User Manual page 74

Setting the communications parameters for the IrDA interface
On the SET SYSTEM menu, selecting the "5: COMMUNICATION"
calls up the screen shown at left.
[1] OPTICAL:
[2] CONNECTOR:
[3] COM PORT:
[4] PROTOCOL TYPE: Switches to the communications protocol
Select a desired screen by using the numerical keys or F5 and F6
keys, and then press the ENT key.
To return to the SET SYSTEM menu, press the C key.
On the SET COMMUNICATION menu, select "1: OPTICAL" to call up
the screen shown at left.
[1] PARAMETER: Switches to the communications parameters
setting screen.
[2] PROTOCOL: Switches to the communications protocol option
screen.
Select a desired screen by using the numerical keys or F5 and F6
keys, and then press the ENT key.
To return to the SET COMMUNICATION menu, press the C key.
60
Switches to the communications parameters
setting screen for the IrDA interface.
Switches to the communications parameters
setting screen for
interface.
Switches to the interface port setting screen.
type setting screen.
the direct-connect