Displaying The Cu System Information On The Bht; Updating The Cu System Program Via The Bht - Denso BHT-300B User Manual

5.6.2

Displaying the CU System Information on the BHT

You can display the CU-311 system information on the BHT's LCD.
Set the BHT on the CU-311 and operate the BHT to display the SYSTEM INFORMATION screen on the
LCD. From that screen, you can call up the system program version and MAC address.
For details about the displaying procedure of the CU system information, refer to Chapter 2, Section
2.5.3, "[ 6 ] System Information."
5.6.3

Updating the CU System Program via the BHT

You can update the CU-311 system program by using the BHT.
(1) Downloading the CU-311 system program file
Download the CU-311 system program file to the BHT from the host PC.
(2) Updating the current CU-311 system program
Set the BHT on the CU-311 whose system program should be updated. Operate the BHT to display
the CU-F/W MODIFY screen where you can update the system program.
During updating, the POWER LED on the CU-311 will flash. (Refer to the Section 5.6.1.)
For details about the updating procedure, refer to Chapter 2, Section 2.6.2, "Updating the CU-311
System."
Chapter 5 Handling the
151
CU-300 (Option)