Photron Fastcam SA6 User Manual page 70

Chapter. 2 Basic Operation
Click on three points – start point (A), vertex of angle (O) and direction point (B) – to draw two
3.
lines forming an angle to be measured on the view window.
The angle is measured and the result is displayed in the lower right corner. The angle is
4.
measured in the clockwise direction from the line between points O and A.
To end angle measurement, click the [Angle measurement] button on the plug-in bar again.
5.
The measurement is also deleted when measurement ends.
• When recording data is saved, measurements are also saved with it.
60