Photron Fastcam SA6 User Manual page 165

After the test, start recording.
9.
Select the desired trigger mode from the [Trigger Mode] button on the control panel's
"Camera" tab, then click the [Record] button.
"Stop" is displayed on the image trigger bar at this time.
• Since a delay occurs with the image trigger from when the image changes until the trigger is applied,
using the center, manual, or end trigger is recommended.
10. Click the [Trigger In] button on the control panel.
"Ready" is displayed on the image trigger bar at this time.
155 Photron FASTCAM Viewer