Photron Fastcam SA6 User Manual page 221

Select the items to display as shot information. Check the items to display.
8.
After setting the shot information, click the [OK] button.
Item
Frame Rate
Shutter Speed
Resolution
Trigger
Frame Number
Current Time
IRIG
Event Marker
Partition Number
Camera Name
Logo
Comment
Date
Time
Display the frame rate as fps (frames/sec) used for the recording
Display the shutter speed used for the recording
Display the resolution used for the recording
Display the trigger mode used for the recording
Display the frame number
(When PFV has been set in the configuration settings to display the
start frame as "0", the number is displayed as 0, when not set, the
number is displayed as 1)
Display the number of seconds in the recording
(The count is set from the trigger frame)
Display the IRIG time for each frame when the image has been
recorded with an IRIG time signal input
Display Event N (N=1-10) when event markers were used
Display the partition number
Display the model name of the camera used to make the recording
Display the Photron company logo
Display the comment entered with the [Comment] button on the [Data
Save] or [File View] tabs
Display the date the file was saved
Display the time the file was saved
211
Description
Photron FASTCAM Viewer