Photron Fastcam SA6 User Manual page 133

Additional Features 2
Item
Sets the operating mode after recording finishes.
Valid when recording with a single camera. Not reflected in recording operations from
PFV.
Auto Play
Resets the camera's settings (frame rate, resolution, etc.) to the factory default state.
Factory Defaults The reset is performed when PFV closes. After PFV closes, for approximately 20
seconds, do not turn off the camera's power. After that, restart the camera.
Normally, when the frame rate is changed, the resolution is automatically changed to
the maximum resolution for the changed frame rate. Check when you wish to maintain
Resolution Mode
the set resolution if that resolution is possible for the changed frame rate (when you do
not want the resolution automatically changed).
This item can turn off the status indicator LEDs on the rear panel.
LED Mode
Left Tee "Additional Features 2"
OFF
MOVE TO MEM MODE
AUTO PLAY
123
Description
Live mode display.
Displays the trigger frame in memory mode.
Automatic playback in memory mode.
Photron FASTCAM Viewer