Photron Fastcam SA6 User Manual page 130

Chapter. 3 2BSetting Shot Conditions/Shooting
Partition
Signal Delay Settings
Signal Delay Setting
TRIG TTL IN
Signal Delay Setting
GENERAL IN
Signal Delay Setting
Vertical Synchronization Signal
Signal Delay Setting
Exposure Interval Signal
Signal Width Setting
TTL Trigger Output
Signal Width Setting
Vertical Synchronization Signal
Signal Delay Setting
GENERAL IN
Item
Display the partition setting.
When partitioning the memory, enter the number of partitions in "Number".
Number
Hardware
Partition
Increment
－
Mode
There are also cameras where individual partition sizes can be set to a desired
setting. For how to divide partitions, refer to "3.8.2. Dividing Partition", page
128.
There are also cameras that can set the recording memory size as desired. For
how to set the recording memory size, refer to "3.8.3. Setting the Recording
Memory Size", page 131.
Item
Set the amount of time to delay recognizing the signal input to the TRIG TTL IN
connector. A value higher than the limit cannot be set.
Set the amount of time to delay recognizing the signal input to the GENERAL IN
connector (excluding READY). A value higher than the limit cannot be set.
Output the vertical synchronization signal delayed by the amount of time set. A value
higher than the limit cannot be set.
Output
Output the exposure interval signal delayed by the amount of time set. A value higher
than the limit cannot be set.
Output
Set the pulse width of the output TTL trigger signal. A value higher than the limit cannot
be set
Set the pulse width of the output vertical synchronization signal. A value cannot be set
higher than the limit.
Output
Set the amount of time to delay recognizing the signal input to the GENERAL IN
connector (excluding READY). A value higher than the limit cannot be set.
Left Tree "Partition"
Sets the number of memory partitions (camera memory
partitions).
After recording, automatically move to the next partition.
The automatic movement is controlled on the camera.
Set when the camera will shoot independently without using
PFV. Do not use this setting when shooting from PFV.
Left Tree "Signal Delay Settings"
120
Description
Description