Photron Fastcam SA6 User Manual page 219

Click the [Logo Select] button to change the logo.
4.
Locate and select the desired file and click the [OK] button.
• Files that can be used for the logo are limited to 8-bit monochrome BMP files. The size of the image
that can be attached differs by the font size used. The default value is 82x20 pixels.
Also use caution as the image colors after inserting the image change color according to the
brightness: 0-10 are transparent, 11-20 are black, 21-255 are unchanged.
Set the preferred position of the shot information to be displayed.
5.
Click the "Display Position" [▼] button and select the desired position from the list.
209 Photron FASTCAM Viewer