Photron Fastcam SA6 User Manual page 199

• When saved in the RAW, RAWW, MRAW formats, a CIH file is simultaneously created. To open a
file saved in the RAW, RAWW formats with PFV, and the CIH file must be present, so do not delete
it.
For AVI
Depending on the value of "Auto divide AVI File" set in the configuration settings, the screen displayed
will differ.
The screen below is displayed when set to "AVI 2.0".
• Depending on the type of codec, there may be an error when saving. If there is an error, select a
different codec and save again.
• There is no performance guarantee when using a codec other than a non-compressed codec with
PFV.
For MOV
• Depending on the type of codec, there may be an error when saving. If there is an error, select a
different codec and save again.
• To output MOV files, QuickTime Player 7.5.5 or higher must be additionally installed on the PC
where PFV is installed.
• For more information about file formats, refer to "Chapter. 8 Appendix", page 277.
Item
Select the codec to use during AVI
Codec
output.
Select the compression quality for the
selected codec.
Quality
The file size gets larger as quality
increases.
Use when detailed settings are
Configure
available for the selected codec.
Displays the version information of the
About
selected codec.
Item
Specify the codec when outputting a
Codec
MOV file.
Specify the compression quality of the
selected codec.
Quality
File size gets larger as quality
increases.
189
Description
Description
Photron FASTCAM Viewer