Photron Fastcam SA6 User Manual page 100

Chapter. 3 2BSetting Shot Conditions/Shooting
• When a "User Defined" is selected that has already been registered, a warning message will be
displayed because it is a registration overwrite. To overwrite the registration, click the [OK] button.
The settings are registered to the specified number.
6.
Select the channel to use for the shot conditions and click the [Select] button, the settings
registered in number are set as the shot conditions.
No.
FPS
WIDTH
HEIGHT
X
Y
Item
A number the user can register. The channels are given a number from 1 to 20.
Displays the registered frame rate (fps).
Displays the number of pixel in the X direction (horizontal direction) for the registered
resolution.
Displays the number of pixels in the Y direction (vertical direction) for the registered
resolution.
With the upper-left of the full resolution as the origin (x, y=0, 0), displays the upper-left
X coordinate for the registered resolution and displays the position of the resolution
set.
With the upper-left of the full resolution as the origin (x, y=0, 0), displays the upper-left
Y coordinate for the registered resolution and displays the position of the resolution
set.
Description
90