SMA SUNNY TRIPOWER 6000TL Installation Manual page 41

SMA Solar Technology AG
3. Push the clamping bracket down.
☑ The clamping bracket clicks audibly into place.
☑ The stranded wire can be seen inside the
clamping bracket chamber.
✖ The stranded wire cannot be seen in the chamber.
The cable is not correctly in place.
• Release the clamping bracket. To do so,
insert a screwdriver (blade width: 3.5 mm)
into the clamping bracket and lever it out.
• Remove the cable and go back to step 2.
4. Push the swivel nut up to the thread and tighten
(torque: 2 Nm).
Installation Manual
6 Electrical Connection
+
+
2
1
+
1
+
STP5-9TL-IA-en-10
2
41