Setting - Mercedes-Benz COMAND Operating Instructions Manual

Time settings
40
COMAND features
These Operating Instructions describe all
standard and optional equipment available
for your COMAND system at the time of
purchase. Country-specific deviations are
possible. Please note that your COMAND
system may not be equipped with all the
features described.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
Press the W button.
X
Select Settings
X
COMAND controller and press W to
confirm.
Select Display and press W to confirm.
X
Select Brightness
X
confirm.
Adjust the brightness by turning cVd the
X
COMAND controller and press W to
confirm.
Display design
Your COMAND display features optimized
designs for operation during the day and at
night. You can set the design by manually
by turning cVd the
and press W to
selecting day or night design or opt for an
automatic setting.
Press the W button.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Display and press W to confirm.
X
Select Day Mode, Night Mode
X
Automatic by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode The display is set
permanently to night
design.
Automatic In the
setting, COMAND
evaluates the readings
from the automatic
vehicle light sensor and
switches between the
display designs
automatically.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i
If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost (
or
Automatic
page 41).
Y