Setting Symbols Display - Mercedes-Benz COMAND control panel Operator's Manual

Navigation*
During route guidance

Setting symbols display

You can select which POIs will appear as
symbols on the map.
i
The symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale ( page 153).
In the Display menu ( page 165)
press the Symbols soft key.
The available options appear.
166
Use or to select an option.
Press .
The selected option is activated. A solid
circle designates an activated op-
tion.
option:
Standard
The symbols for the system default
setting are displayed on the map;
Personal option:
The symbols to be displayed can be
selected from a list ( page 167);
option:
None
No symbols will be displayed on the
map.
i
The Change soft key is only available if
the Personal option is selected. Other-
wise, it will appear shaded out.