Alto-Shaam 767-SK/III Installation Operation & Maintenance page 16

Preset Menu Keys:
This Alto-Shaam oven allows the operator to set up to eight cook/smoke programs. Each program can be
preset in any program mode to cook/smoke by time or internal product temperature. Programs are recalled
and stored using the P
additional functions described in the "User Options" section of this manual.
Programming a Cook/Smoke Program
Select the product to be programmed and begin programming with the oven control power
O
FF
to the unit will be indicated by an illuminated green indicator light located in the upper left
corner of the O
H
OLD
Pre ss H
Press C
is displayed. To change the cook temperature, press the U
To cook by tim e — press the T
To change the set time, press the U
To cook by probe — press the P
To change the set temperature, press the U
indicator will illuminate.
Press S
time will be displayed.
or The oven preheat indicator will illuminate. Oven is now in the preheat mode and is
— —
automatically programmed to preheat to the cook temperature.
Select a letter code for the product programmed by the previous steps. Press and hold the selected
P
RESET
A
PRESETS illuminate and the product programmed is now stored in memory for the specific letter key pressed.
Additional programs can be stored in the remaining P
Note: The last P
to be programmed. Settings can be manually changed for the next product and an alternate
pre-programmed letter key selected.
Erasing a Cook/Smoke Program
To erase a program, the oven must be in either the power-up hold mode or in the preheat mode. The oven
cannot be running a P
When the oven is in the power-up hold mode or in the preheat mode, press and hold both the C
the appropriate letter P
program's indicator light will go out to indicate the program has been erased.
IMPORTANT -
preset key, it is very important to make a written permanent record of the product and
the program letter assigned. Menu card (PE-23384) is provided for this purpose.
767-SK/III, 1767-SK/III, 2800-SK/III
O P E R A T I N G I N S T R U C T I O N S
Keys labeled "A through H." These keys, along with the key labeled "I", share
RESET
. Press and release control O
/O key. The oven will begin operating in the hold mode. The amber
N FF
indicator will be illuminated and the last set hold temperature will be displayed.
K e y. To change the hold temperature, press the U
OL D
Key. Oven preheat indicator will illuminate and the last set cooking temperature
OOK
Key. To set the smoke time desired, use U
MOKER
key until you hear a brief, four second beep. The letter key program indicator light will
Key used will be the oven cooking run sequence for the next product
RESET
Menu program.
RESET
Key to be erased. The oven will beep in approximately four seconds and the
RESET
After programming a specific product into memory in a programmable
/O key. The oven will beep for one second and power
N FF
Key. Last set cooking time is displayed.
IME
or D A Key. The green T
P OWN RROW
Key. Last set internal product temperature is displayed.
ROBE
or D
P OWN
RESET
/
INSTALLATION OPERATION
or D A
P OWN
or D A Keys.
P OWN RROW
indicator will illuminate.
IME
A Key. The green P
RROW
or D A key. The last set
P OWN RROW
Keys if not previously programmed.
/
SERVICE MANUAL
Key.
RROW
ROBE
Key and
ANCEL
. 15
PG