How To Set The Configuration Server - CyberData V2 Manual
Hide thumbs
Also See for V2:
- Operation manual (67 pages) ,
- Manual (6 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
How To Set The Configuration Server
Quick Steps
1. Login to the Web GUI of the device by putting the IP Address of the device into your browser.
Login to the device when prompted. The factory default username is admin and the
password is also admin.
The server http://10.10.0.223:80 requires a username
and password. The site says: CyberData VoIP Strobe.
User Name:
Password:
2. Once logged in click on the "Autoprovisioning" option on the left side.
3. Fill in the following information.
• Enable Autoprovisioning - Check the box
• Get Autoprovisioning from DHCP - Check the box
• Autoprovisioning Server (IP Address) - Define the IP address of your PBX in our
example this is 10.10.0.1
© Copyright Schmooze Com, 2012
admin
••••
Cancel
Log In
Advertisement
Table of Contents
Need help?
Do you have a question about the V2 and is the answer not in the manual?
Questions and answers