ELECRAFT KX3 Assembly Manual page 23
Ultra-portable 160-6 meter, all-mode transceiver
Hide thumbs
Also See for KX3:
- Owner's manual (55 pages) ,
- Assembly manual (52 pages) ,
- Installation and operation manual (17 pages)
Table of Contents
Advertisement
Mount the heat sink on the side panel of the bottom cover with two screws as shown in Figure 27. The
remaining two screw holes will be filled later.
Peel the protective cover off of the back of the self-adhesive serial number label and affix it to the bottom
cover as shown in Figure 28.
Figure 27. Mounting the Heat Sink on the Bottom Cover.
Figure 28. Placing the Serial Number on the Bottom Cover.
21
Advertisement
Table of Contents
