Table of Contents
Advertisement
A P P E N D I X C : R E F E R E N C E T A B L E S & G R A P H S
Legend Performance Graph
7000
6000
5000
L2012
4000
L2512
3000
2000
1000
0
0
20
Trace Engineering Co. Inc.
5916 195
Street, NE
th
Arlington, WA 98223 USA
Page
74
POWER VS. TIME
L3012
40
60
80
TIME IN MINUTES
Tel (360) 435-8826
Fax (360) 435-2229
www.traceengineering.com
100
120
140
160
180
Part Number 3179
Effective August 6, 1998
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Legend and is the answer not in the manual?
Questions and answers
how do you clear error light and alarm from remote control
To clear the error light and alarm on the Trace Engineering Legend remote control, follow these steps:
1. Identify the Error – Check the LED indicators on the remote control to determine the cause of the alarm (e.g., low battery voltage, high temperature, etc.).
2. Resolve the Issue – Address the underlying problem based on the error type:
- If the battery voltage is too low or high, check and adjust the battery condition.
- If there is a high-temperature warning, allow the unit to cool down.
- Ensure all connections (battery and AC output) are secure and clean.
3. Reset the Inverter – Turn the inverter off, wait a few seconds, and turn it back on.
4. Monitor the System – Observe the LED indicators to confirm the error is cleared.
If the issue persists, further troubleshooting may be required.
This answer is automatically generated