Table of Contents
Advertisement
A P P E N D I X C : R E F E R E N C E T A B L E S & G R A P H S
Legend Series II Efficiency Curve
120
100
80
60
40
20
0
Trace Engineering Co. Inc.
5916 195
Street, NE
th
Arlington, WA 98223 USA
L2012
Output Power In Watts X 100
Tel (360) 435-8826
Fax (360) 435-2229
www.traceengineering.com
L2512
L3012
Part Number 3179
Effective August 6, 1998
Page
73
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Legend and is the answer not in the manual?
Questions and answers
how do you clear error light and alarm from remote control
To clear the error light and alarm on the Trace Engineering Legend remote control, follow these steps:
1. Identify the Error – Check the LED indicators on the remote control to determine the cause of the alarm (e.g., low battery voltage, high temperature, etc.).
2. Resolve the Issue – Address the underlying problem based on the error type:
- If the battery voltage is too low or high, check and adjust the battery condition.
- If there is a high-temperature warning, allow the unit to cool down.
- Ensure all connections (battery and AC output) are secure and clean.
3. Reset the Inverter – Turn the inverter off, wait a few seconds, and turn it back on.
4. Monitor the System – Observe the LED indicators to confirm the error is cleared.
If the issue persists, further troubleshooting may be required.
This answer is automatically generated