Table of Contents
Advertisement
Entertainment Options
Programming the Universal
Remote Control
The Cal Spas universal remote has been pre-
programmed to function with the entertainment system
the spa has been configured with. However, in case
you need to reprogram the remote, use the device list
below for the programming code.
1.
Turn on the device (TV, CD player, DVD player)
with the manufacturer's remote control.
2.
Press the button on the remote for the device you
want to program (TV, CD, DVD, etc.)
3.
Press and hold the SETUP button until the LED
blinks twice.
4.
Enter the device code. If you perform this
procedure correctly, the LED will blink twice. If not,
repeat steps 2 and 3.
Device Manufacturer
Samsung 42" plasma
River Park 20"
Aquatic
Aquatic
Poly Planar
JBL
Page 10
Device Type
Code
TV
1312
TV
1530
CD
1867
DVD
1866
DVD
N/A
CD
N/A
Waterfalls
Although the canopy waterfall and the barbecue island
waterfall have different appearances and locations,
they operation in the same manner.
•
Fill the tank with water and make sure the water
level is above the submersible pump.
•
Ensure the pump is connected to 110V GFCI outlet.
•
Make sure that there is no debris in the filler pan for
the waterfall.
•
Maintain a consistent water level, as dry pumping
will burn out the pump motor.
•
Turn on the waterfall by flipping up the switch to the
ON position.
LED Lights
The switch for the LED lights is located in a covered
utility box on the side of the barbecue island. Flip it up
to turn all the lights on.
2007 Barbecue Island Owner's Manual
LTR20071036, Rev. A
Advertisement
Table of Contents
