Rock / Stone Application - Cal Flame MI-001 Owner's Manual

Barbecue islands
Table of Contents

Advertisement

Rock / Stone Application

For Models G-2500, G-2500F, G-2600, G-3000, G-
3500F, G-3600
1.
Place the island sections together on the ground.
2.
Make sure the ground where the barbecue is place
is as level as possible for best alignment.
2007 Barbecue Island Owner's Manual
LTR20071036, Rev. A
NOTE: If the ground is not level, use shims to level out
the island sections. This needs to be done before you
place the bolts.
3.
Connect the speakers, lights, and main power
cables before sliding the sections together.
4.
Insert the bolts through the pre-drilled holes from
the inside of the barbecue island (total of four
bolts on each side). Tighten all bolts using a 9/16"
wrench.
Assembly
Page 5

Advertisement

Table of Contents
loading

Table of Contents