Programming The Universal Remote Control - Cal Flame MC800 Owner's Manual

Entertainment Options
Programming the Universal
Remote Control
The Cal Spas universal remote has been pre-
programmed to function with the entertainment system
the spa has been configured with. However, in case you
need to reprogram the remote, use the device list below
for the programming code.
Turn on the device (TV, CD player, DVD player) with
1.
the manufacturer's remote control.
Press the button on the remote for the device you
2.
want to program (TV, CD, DVD, etc.)
Press and hold the SETUP button until the LED
3.
blinks twice.
Enter the device code. If you perform this procedure
4.
correctly, the LED will blink twice. If not, repeat steps
2 and 3.
Device Manufacturer
Samsung 42" plasma
River Park 20"
Aeware
Sony CDX-GT10M
Sony CDX-HS0MW
Page 14
Device Type Code
TV
1312
TV 1530
DVD
1866
CD
CD
Waterfalls
Although the canopy waterfall and the barbecue island
waterfall have different appearances and locations, they
operation in the same manner.
Fill the tank with water and make sure the water
•
level is above the submersible pump.
Ensure the pump is connected to 110V GFCI outlet.
•
Make sure that there is no debris in the filler pan for
•
the waterfall.
Maintain a consistent water level, as dry pumping
•
will burn out the pump motor.
Turn on the waterfall by flipping up the switch to the
•
ON position.
LED Lights
The switch for the LED lights is located in a covered
utility box on the side of the barbecue island. Flip it up to
turn all the lights on.
2008 Barbecue Island Owner's Manual
LTR20081036, Rev. A