Attaching The Lifesize Micpod Strain Relief Clip - LifeSize Express 200 Installation Manual

Attaching the LifeSize MicPod Strain Relief Clip

If the LifeSize MicPod is installed in an area where the cord could be pulled or tripped upon,
LifeSize recommends using the strain relief clip included with your LifeSize MicPod to
reduce the chance of disconnecting or damaging the plug or the LifeSize video
communications system codec.
Before attaching the strain relief clip to the codec, ensure that the codec surface is clean
(free of dirt, dust, oil, and other residues) and dry. The adhesive tape on the strain relief clip
is intended for a single use. Attach the strain relief clip to the codec and route the
LifeSize MicPod cable through the strain relief clip as shown in the following diagram.
To obtain a replacement strain relief clip, contact your LifeSize Partner.
LifeSize Express 200 Installation Guide 19